Index by Author

Alexander, George - New Mexico State University

• A Security Technology Minor Volume 2 No.1 Fall 1997

Anderson, Peter H. -Department of Electrical Engineering, Morgan State University

• Use of a PC Printer Port for Control and Data Acquisition Volume 1 No.1 Fall 1996

Andress, Jim

• Electromagnetic Wavelength Spectrum Volume 1 No.3 Spring 1997

Anwar, Sohail  - Division of Business and Engineering, The Pennsylvania State University - Altoona College

• International Academic Linkages and Partnerships: A Case Study Volume 4 No.1 Winter 2000

Bandyopadhyay, Amit - Department of Construction Engineering Management Technology, State University of New York, Farmingdale, NY

• A Study on use of Waterjet in Construction Volume 2 No.2 Winter 1998

Barker Derek R - Ranger Security Detectors, Inc., El Paso, Texas

• The Advantage of Multiple-Zone Metal Detection Over Conventional Single Zone Detectors Volume 1 No.4 Summer 1997

Bartlett, James - Industrial & Manufacturing Engineering, North Dakota State University, Fargo ND

• Senior Design by Web Volume 2 No.4 Fall 1998

Beasley, Jeffrey S. - Department of Engineering Technology, New Mexico State University

• Computing Azimuth and Elevation Angles with JavaScript Volume 3 No.2 Spring 1999

• Getting Started With Altera VHDL a tutorial exercise Volume 2 No.2 Winter 1998

• NETSCAPE e-mail Tutorial Volume 2 No.2 Winter 1998

• Transistor Level Implementation of CMOS Combinational
  Logic Circuits Volume 1 No.3 Spring 1997

• The Mixed Logic Approach to Digital Design and Analysis Volume 1 No.1 Fall 1996

• The dB in Communications Volume 1 No.1 Fall 1996

Becvár, Daniel - Brno University of Technology

• Novel Generations of Inverting Current Conveyor Using Universal Current Conveyor Volume 3 No.4, Spring 2000

Bender, Richard - Engineering Technology Division, University of Pittsburgh at Johnstown

• Derived Trigonometric Functions Volume 1 No.3 Spring 1997

Brown, Wayne L. - CIS/ECET Department, DeKalb Technical Institute

• The Personal Computer-Based DCS Simulator Volume 2 No.3 Spring 1998

Buchanan, Walter W. - Northeastern University, Boston, Massachusetts

• An Interdisciplinary Instrumentation Laboratory Volume 4 No.1 Winter 2000

Champion, Sonia - Department of Engineering Technology, New Mexico State University

• A VLSI Tutorial Volume 1 No.1 Fall 1996

Coates, Eyler R. - School of Engineering Technology, The University of Southern Mississippi

• Introduction to QS9000 Volume 1 No.4 Summer 1997

Coho, Donald E. - York Campus of the Pennsylvania State University

• Introducing the World Wide Web and HyperText Markup Language Volume 2 No.2 Winter 1998

Cole, William E. -  School of Engineering Technology, Northeastern University, Boston, Massachusetts

• Incorporating CAD Analysis Tools into the Mechanical Engineering Technology Curriculum Volume 3 No.3, Fall 1999
• An Interdisciplinary Instrumentation Laboratory Volume 4 No.1 Winter 2000

Combs, Michael S. - Morehead State University, Morehead, Kentucky

• Design and Construction of an 8088-based Single Board Microcomputer: A Student Project Volume 2 No.4 Fall 1998   

• Construction, Troubleshooting, and Programming of an Intel 8255-Based Interface Card  Volume 4 No.1 Winter 2000

Cooper, Sonya - Civil Engineering Technology, New Mexico State University

• An Approach Toward Developing A Construction Program Option Within the Civil Engineering Technology Curriculum Volume 1 No.4 Summer 1997
• Book Review: Planning, Performing, and Controlling Projects Volume 1 No.3 Spring 1997
• Civil Engineering Technology: Helping to Close the Gap an editorial Volume 1 No.2 Winter 1997

Coppinger, J. Tim

• Why Are You So Confused? an editorial Volume 1 No.3 Spring 1997

Cox, Leon - Department of Industrial Engineering, New Mexico State University

• Computer Integrated Manufacturing: Challenges and Barriers to Implementation Volume 2 No.2 Winter 1998

Dark, Mellisa - Purdue University

• The Midwest Center for Advanced Technology Education Volume 1 No.3 Spring 1997

Edaakie, Jeffrey - Department of Engineering Technology, New Mexico State University

• A VLSI Tutorial Volume 1 No.1 Fall 1996

Edmonson, Charlie P. - Department of Engineering Technology, The University of Dayton

• An Approach to Introduce Engineering Technology to High School and Junior High School Students Volume 2 No.4 Fall 1998 )

Elsawy, Ahmed - Department of Industrial Technology, University of Northern Iowa

• A Development of an Interface Design Alternative for Pneumatic Design Circuits Volume 2 No.4 Fall 1998
    and Veekit O'Charoen

Garcia, Andy - Department of Engineering Technology, New Mexico State University

• Minimum DOS 6.2 Volume 1 No.1 Fall 1996
• Minimum Windows 3.1 Volume 1 No.1 Fall 1996
• Minimum Windows 95 Volume 1 No.1 Fall 1996

Garcia, Mary Lynn - Sandia National Laboratories

• Overview of Emerging Threats to the United States Volume 2 No.1 Fall 1997

• Security Engineering - A Discipline Whose Time Has Come Volume 1 No.4 Summer 1997

Geraghty, Michael - Department of Construction Engineering Management Technology, State University of New York, Farmingdale, NY

• A Study on use of Waterjet in Construction Volume 2 No.2 Winter 1998

Giever, Dennis - New Mexico State University

• A Security Technology Minor Volume 2 No.1 Fall 1997

Globig, James E. - Engineering Technology, University of Dayton

• The Engineer 2000 Volume 3 No.3, Fall 1999

Gohmann,Ed - Purdue University School of Technology, New Albany, Indiana

• Newtons, Slugs and Kilograms Force Volume 2 No.2 Winter 1998

• Pressures Within a Centrifugal Casting Volume 3 No.1 Winter 1999
  

Grenquist, Scott - Institutional Software Development Center, University of Missouri-Rolla

• The Virtual Classroom at UMR: Broadcasting "Live" Audio, Notes and Images as a Multimedia Lecture Over the World-Wide Web in Real-Time  Volume 1 No.2 Winter 1997

Grisé, William R. - Department of, IET Morehead State University, Morehead, KY

• Applications of Switched-Capacitor Circuits in Active Filters and Instrumentation Amplifiers Volume 3 No.3, Fall 1999     
• Operational Transconductance Amplifiers (OTA) for synthesis of voltage-controlled active-filter tuned oscillators Volume 2 No.4 Fall 1998
• Application of the Operational Transconductance Amplifier (OTA) to Voltage-controlled Amplifiers and Active Filters Volume 2 No.2 Winter 1998

Hanson, Roland S. - Engineering Technology, Georgia Southern University

• Exploration, Not Optimization: Using a Spreadsheet to Examine the Effect of Changing Variable Values in an Aggregate Scheduling Problem Volume 1 No.2 Winter 1997
• Book Review: Manufacturing and the Internet Volume 1 No.1 Fall 1996

Hoban, Mark J. - Manufacturing Engineering Technology, Brigham Young University

• Soldering Volume 1 No.3 Spring 1997

Hoekstra, Nicole - Western Washington University

• Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Volume 3 No.4, Spring 2000

Hudson, William B. - Department of Electrical and Computer Engineering, Kansas State University

• Getting Started With Altera VHDL a tutorial exercise Volume 2 No.2 Winter 1998

• Transistor Level Implementation of CMOS Combinational Logic Circuits Volume 1 No.3 Spring 1997

• The Mixed Logic Approach to Digital Design and Analysis Volume 1 No.1 Fall 1996

Huff E. Scott - Portland Community College

• Engineering Technology Boot Camp Volume 1 No.2 Winter 1997

Huffine,Bill - Department of Engineering Technology, University Of Southern Colorado

• Common Source JFET Amplifier Experiment Volume 2 No.2 Winter 1998
• Common Emitter Amplifier Experiment Volume 1 No.3 Spring 1997

Jackson, Ebenezer - Electrical & Electronic Engineering Dept., Kumasi, Ghana

• International Academic Linkages and Partnerships: A Case Study Volume 4 No.1 Winter 2000

Jenkins, Thomas - Engineering Technology, New Mexico State University

• Recursion Volume 2 No.2 Winter 1998

Kasamis, Dan - Purdue University, School of Technology

• Introducing Lean Production Volume 4 No 1, Winter 2000

Kitto, Kathleen L. - Western Washington University, Engineering Technology Department

• Innovations in Manufacturing Engineering Technology – Integrating Collaborative Engineering and Inaugurating Comprehensive Assessment Volume 4 No.1 Winter 2000

Kollmer, Kristoffer - Mechanical Engineering Technology, Central Washington University

• Applications and Development in the Cryogenic Processing of Materials Volume 3 No.1 Winter 1999

Koukos, Antonis K. - Electrical Engineering Department, Technological Educational Institution of Chalkis 

• Design and Hardware Implementation of a Connection Identification System for ATM Networks Volume 4 No.1 Winter 2000

 Kraebber, Henry - Purdue University, School of Technology

• Changing with Technology: A look at the impact of change on technical education  Volume 3 No.3, Fall 1999

• Introducing Lean Production Volume 4 No 1, Winter 2000

Lahndt, Leslie - Department of Engineering Technology,University of North Texas, Denton, TX

• Industry Mentored Engineering and Engineering Technology Curricula Volume 2 No.3 Spring 1998

Light, Robert - Associate Provost, Penn State Erie, The Behrend College, Erie, PA

• Industrially-Sponsored Senior Projects Volume 2 No.4 Fall 1998

Long, Dale - Department of Engineering Technology, New Mexico State University

• Sensors, An Integral Part of Today's Automobile Volume 3 No.1 Winter 1999

Lueders,Kathryn L. - NASA White Sands Test Facility

• Reengineering: A Maintenance and Test Operation Volume 2 No.1 Fall 1997

Lunt, Barry M. - Electronics Engineering Technology, Brigham Young University

• Soldering Volume 1 No.3 Spring 1997

• Safety with Electricity Volume 3 No.3, Fall 1999

Magill, Michael A. - Mechanical Engineering Technology,Purdue University, West Lafayette, IN

• A Strength of Materials Laboratory Experiment: Combined Stress Volume 2 No.3 Spring 1998

Marquez, Juan - Department of Engineering Technology New Mexico State University

• Altera Tutorial Volume 2 No.3 Spring 1998

McCurdy, Lyle B. - Department of Electronics and Computer Engineering Technology,
Cal Poly Pomona 

• An Evaluation of, and Suggestions for, the new ET2K Criteria Volume 3 No.4, Spring 2000    
• The Engineering Team Volume 3 No.4, Spring 2000    
• Suggested Articulation Guideline: Engineering, Engineering Technology, Industrial Technology, and Vocational Technology Volume 3 No.4, Spring 2000

McKell, Eric K. Western - Washington University, Engineering Technology Department

• Innovations in Manufacturing Engineering Technology – Integrating Collaborative Engineering and Inaugurating Comprehensive Assessment Volume 4 No.1 Winter 2000

Meredith, David B. -  The Pennsylvania State University

• Simulating the performance of an Air Handling Unit on a Psychrometric Chart Volume 3 No.2 Spring 1999

Meredith, Mark W. -  The Pennsylvania State University

• Simulating the performance of an Air Handling Unit on a Psychrometric Chart Volume 3 No.2 Spring 1999

Miller, Rick - ECNS and Electrical/Electronics Program, Ferris State University, Big Rapids, MI

• Writing the Course Scheduler Program Volume 2 No.1 Fall 1997 
• Teaching PLC Programming to Technology Students Volume 3 No.4, Spring 2000

Morse, Julia - The Peter Kiewit Institute of Information Science, Technology and Engineering, Industrial Systems Technology Department, College of Engineering and Technology, University of Nebraska-Lincoln

• CNC Workshop Software and Workbook a Software Review, Volume 3 No.4 Spring 2000
• Information Technology Abilities for Engineering Professionals at Steelcase Corporation Volume 4 No.1 Winter 2000

Navarro, Alejandro - Department of Engineering Technology New Mexico State University

• Altera Tutorial Volume 2 No.3 Spring 1998

O'Charoen, Veekit - Department of Industrial Technology, University of Northern Iowa

• A Development of an Interface Design Alternative for Pneumatic Desigin Circuits Volume 2 No.4 Fall 1998

Ogle, Michael K. - Engineering Technology, Georgia Southern University

• Exploration, Not Optimization: Using a Spreadsheet to Examine the Effect of Changing Variable Values in an Aggregate Scheduling Problem Volume 1 No.2 Winter 1997

Page, Joseph T.  II - New Mexico State University

• Computing Azimuth and Elevation Angles with JavaScript Volume 3 No.2 Spring 1999

Philpot, Timothy A. - Department of Industrial and Engineering Technology, Murray State University

• Bridging the Gap between Mechanics of Materials Lectures and Homework with MDSolids Volume 2 No.3 Spring 1998

Pines, Edward - New Mexico State University

• Reengineering: A Maintenance and Test Operation Volume 2 No.1 Fall 1997

Pippen, David - Klipsch School of Electrical and Computer Engineering, New Mexico State University, Las Cruces, NM

• A Primer on Hand Soldering Electrical Connections Volume 2 No.1 Fall 1997

• Jack's and Sam's Science Fair Project Volume 1 No.4 Summer 1997

Polonskii, Mikhail M. - Universidade de Passo Fundo  - RS, BRAZIL

• Complex Systems Simulation Using MATLAB/SIMULINK Volume 4 No.1 Winter 2000

Quinnell, Kyle C. - Department of Engineering Technology, New Mexico State University

• Building an 8-bit PC-Based Logic Analyzer Volume 1 No.2 Winter 1997

Ratan, Kumar - University of North Texas

• Software Tool for Open Channel Flow Calculations Volume 3 No.4 Winter 2000

Reed, J. Eric - School of Engineering Technology, The University of Southern Mississippi

• Introduction to QS9000 Volume 1 No.4 Summer 1997

Rehg , James - Penn State Altoona

• Developing Web-Based Courses in Engineering Technology Volume 3 No.1 Winter 1999

Ricketts, Paul H. - Department of Engineering Technology, New Mexico State University

• Technical Organizations, Association, and Professional Societies Volume 2 No.4 Fall 1998

• Nonlinear Regression Analysis On A Spreadsheet Volume 1 No.1 Fall 1996

• Hydraulic Jack Laboratory Experiment, Mechanical Advantage and Efficiency Volume 3.2 No.2 Spring 1999

Rico, Guillermo - Department of Engineering Technology, New Mexico State University

• An Easy Implementation of Chebychev Filters Volume 1 No.2 Winter 1997

• A Simple Procedure for Measuring Inductance Volume 1 No.1 Fall 1996

Riley, Linda Ann - Department of Industrial Engineering, New Mexico State University

• Computer Integrated Manufacturing: Challenges and Barriers to Implementation Volume 2 No.2 Winter 1998

Roberts, Jack - Department of Industrial and Engineering Technology, Texas A&M University-Commerce

• Total Productive Maintenance Volume 2 No.1 Fall 1997

Robinson, C. L. - School of Technology, Kent State University

• A Software Tool for Alternating Current Circuit Analysis Volume 2 No.1 Fall 1997

Roth, David - School of Engineering and Engineering Technology, Penn State Erie, The Behrend College, Erie, PA

• Industrially-Sponsored Senior Projects Volume 2 No.4 Fall 1998

Salter, Debbie - Department of Engineering Technology, New Mexico State University

• Fingerprinting - an Emerging Technology Volume 1 No.4 Summer 1997

Sepmeier, Bill - NSN Network Services, Avon, CO

• Understanding Satellite Link Budgets Volume 1 No.3 Spring 1997
• Worldwide Internet Connectivity via Satellite... Why Wait? Volume 1 No.2 Winter 1997
• Satellite Audio Networks... Bits of History Volume 1 No.2 Winter 1997

Shaalan, Hesham E. - Electrical Engineering Technology, School of Technology, Georgia Southern University

• Using Automated Switching Techniques to Meet Future Power Demands Volume 2 No.3 Spring 1998

Shaalan, Hesham - Georgia Southern University

• Using Engineering Software to Teach Electric Power Distribution Volume 3 No.2 Spring 1999

Siyambalapitiya, Sarath B.- Department of Engineering Mathematics, University of Peradeniya, Sri Lanka

• Importance of Algorithmic Approach for Engineering Mathematics Courses Volume 4 No.1 Winter 2000

Smith, Trintus T. - School of Engineering Technology, The University of Southern Mississippi

• Introduction to QS9000 Volume 1 No.4 Summer 1997

Sun, Kang - School of Engineering Technology, Northeastern University, Boston, MA

• Teaching Internet Publishing Volume 2 No.3 Spring 1998

• An Appealing Applet Volume 2 No.2 Winter 1998 

Tang, Jeff

• Law Enforcement 10-codes, Phonetic Alphabet, & Criminal Codes Volume 1 No.4 Summer 1997

Tapper, Jerome - Northeastern University, School of Engineering Technology, Boston, Massachusetts

• Understanding and Implementing the Algorithm Used for Adding BCD Numbers Volume 2 No.3 Spring 1998

Thomas, Charles R. - Mechanical Engineering Technology, Purdue University

• Generation X at Technical College Volume 2 No.2 Winter 1998

• Giving Up the Chalkboard: Student Response and Instructor Observation Volume 2 No.1 Fall 1997

Tisdale, Eric - Ball State University

• Teaching I/O in Preparation for a Manufacturing Capstone Course Volume 3 No.3, Fall 1999
   

Vrba, Kamil  - Brno University of Technology

• Novel Generations of Inverting Current Conveyor Using Universal Current Conveyor Volume 3 No.4, Spring 2000

Zargari, Ahmad - Moorehead State University

• Design and Construction of an 8088-based Single Board Microcomputer: A Student Project Volume 2 No.4 Fall 1998

• Construction, Troubleshooting, and Programming of an Intel 8255-Based Interface Card  Volume 4 No.1 Winter 2000

Return to Archive Directory

Return to the Technology Interface Home Page

This page last updated 10/16/01